Running In Oil is a premium mineral, SAE 15W-40, non friction modified, low detergent & dispersant engine oil, designed for the critical running in period for both new, re-built and crate engines. It contains an advanced anti-wear additive pack featuring HIGH ZINC (exceeding 1600+ ppm levels) for ultimate engine wear protection during these first stages of engine use.
Application:Running In Oil has a High Zinc formulation to protect the valve train including camshafts, followers, rockers and pushrods. It allows the piston rings to bed in correctly with the cylinder walls, preventing glazing of the bores and it can be used for both dynamometer and normal road run in procedures. If used for running in on road, the suggested running in period for Running In Oil is approximately 500 Kilometres after which both the oil and filter should be changed.
Key Specifications :
API SF/CC
Typical Data:
Density at 15°C, kg/L 0.869
Viscosity, Kinematic, cSt
at 40°C 109
at 100°C 14,8
Viscosity Index 140
Cold Cranking Viscosity, cP at -20°C 4470
Zinc, Mass % 0.161
